Digiplex 848/DigiplexNE LED Keypads 19
n
7.0 ACCESS CODES
Access Codes are codes that will allow you and others to access the
system. These codes can be programmed to permit access to all or
some features and areas. The installer will program User Access
Codes to be four digits, six digits, or variable from one to six digits in
length. Each digit can be any value between zero and nine. If the
installer programmed your system to accept a variable code length,
you may have to press the
[Enter]
key after entering your User
Access Code. Only the System Master Code cannot be less than 4
digits.
7.1 S
YSTEM
M
ASTER
C
ODE
Default: (1234 / 123456)
The System Master Code will give you access to all the features as
well as the ability to add, modify, or delete any User Access Codes.
We suggest that you change this code to prevent others from
accessing and changing your options without authorization.
How do I change the system master code?
1) Enter the
[
System Master Code
]
. Your keypad will emit a
Confirmation Beep and the
A
CCESS
light will flash.
2) Press the
[0]
key. Your keypad will emit a Confirmation Beep.
The area light(s) and the
P
RG
action light will flash.
3) Press the
[Acc]
key. Your keypad will emit a Confirmation Beep.
The area light(s) and the
A
CCESS
action light will illuminate. The
P
RG
action light will flash.
Summary of Contents for Digiplex 848
Page 1: ...48 Zone LED Keypad User Manual DGP2 648 ...
Page 2: ......
Page 37: ...Digiplex 848 DigiplexNE LED Keypads 35n Figure 2 Delayed Fire Zone ...
Page 43: ......
