24 User’s Manual
7.3 A
REA
A
SSIGNMENT
In a partitioned system the system can be divided into distinct
protected areas. Programming access to a specific area or areas is
called Area Assignment. User Access Codes are only able to
perform actions (arming, disarming, etc.) in the area(s) the code is
assigned. When entering User Programming, the Area LEDs will
illuminate to show you which areas you have access to. When you
begin programming, the numerical LEDs 1 to 4 will illuminate and
correspond to areas assigned to LEDs A1 to A4 respectively.
Press option ON/OFF
Option Description
[8]
Area Access
OFF (default)
User Access Code obeys the keypad’s
area assignment in a partitioned system.
When you enter your user code, your
keypad will permit access only to areas it
controls. This feature applies to both
options.
ON
When option [8] is
ON
, the keypad will
permit access to all the areas assigned to
the User Access Code. When option [8] is
OFF
, the keypad will only permit access to
the areas it controls. This option is active
but not functional on the DGP2-648
keypad.
Summary of Contents for Digiplex 848
Page 1: ...48 Zone LED Keypad User Manual DGP2 648 ...
Page 2: ......
Page 37: ...Digiplex 848 DigiplexNE LED Keypads 35n Figure 2 Delayed Fire Zone ...
Page 43: ......
