26 User’s Manual
8.0 TROUBLE DISPLAY
When your system experiences problems or is tampered with, the
T
RBL
action light will illuminate. Most of the trouble conditions will be
programmed by your installer to be reported directly to your security
company (if connected). Your keypad will only display troubles, which
occur in the area(s) to which the keypad has been assigned.
Potential troubles have been sorted into eight groups. Five of these
trouble groups are listed on page 27, each with a brief explanation.
Contact your security company in the event of an un-listed trouble.
We strongly suggest that you inform your security company
of the trouble and allow them to service your system.
If your keypad is in Confidential Mode, the
Trbl
action light
will not illuminate until you enter your User Access Code or
press a key depending on how your keypad was
programmed.
How do I View the Trouble Display?
1) The
T
RBL
action light illuminates.
2) Press the
[Trbl]
key. The
T
RBL
action light will flash and the
numerical light(s) representing group heading number(s) will
illuminate.
3) Press the numerical key corresponding to the Group heading to
view the specific trouble.
Summary of Contents for Digiplex 848
Page 1: ...48 Zone LED Keypad User Manual DGP2 648 ...
Page 2: ......
Page 37: ...Digiplex 848 DigiplexNE LED Keypads 35n Figure 2 Delayed Fire Zone ...
Page 43: ......