Digiplex 848/DigiplexNE LED Keypads 9
n
5.0 ARMING
When the system is armed, it will respond to any breach in the zones
according to the way each zone is programmed. For example, if
someone opens a window that is armed, the system can trigger an
alarm and alert your security company.
5.1 E
XIT
D
ELAY
T
IMER
Arming the system will start the Exit Delay Timer. This will provide
enough time for you to exit the protected area before the system
arms. The Status light will flash green while the time elapses. The
timer can be assigned different time limits and the keypad can be
programmed to beep while the time elapses on the timer.
5.2 R
EGULAR
A
RMING
This method is used for everyday arming of the system. All zones
within the protected area must be closed to arm the system. To check
the status of the zones in each area, refer to Area Display on page 7.
Use One-Touch keys (see section 5.6) or a keyswitch to arm
the area (see section 5.7).
How do I Regular Arm the system?
1) Enter your
[Access Code]
. Your keypad will emit a Confirmation
Beep. The
A
CCESS
action light will flash.
2) Press the
[Arm]
key. If you have access to more than one area,
press the number key representing the area you want to arm or
press the
[0]
key for all assigned areas. After the Confirmation
Beep, the Exit Delay Timer will begin.
Summary of Contents for Digiplex 848
Page 1: ...48 Zone LED Keypad User Manual DGP2 648 ...
Page 2: ......
Page 37: ...Digiplex 848 DigiplexNE LED Keypads 35n Figure 2 Delayed Fire Zone ...
Page 43: ......
