Spectra LED Keypads 23
4.7 O
NE
-T
OUCH
A
RMING
One-Touch Arming
allows you to arm the system without
using an access code.
4.7.1 One-Touch Regular Arming
Press and hold the
[
ENTER
]
button for 3 seconds (see
Note2
) to
arm all zones in the partition. You can use this feature to allow
specific individuals like service personnel (i.e. cleaners) to arm
without giving them access to any other alarm system
operations. For details on
Regular Arming
, refer to section 4.3.
4.7.2 One-Touch Stay Arming
Press and hold the
[
STAY
]
button for 3 seconds (see
Note2
) to
arm all zones not defined as
Stay Zones
. For details on
Stay
Arming
, refer to section 4.4.
4.7.3 Fast Exit
WHEN
THE
SYSTEM
IS
ALREADY
STAY
ARMED
: this feature will allow
you to exit already armed premises and keep the system armed.
Exit and Stay Arm:
Press and hold the
[
STAY
]
button for 3 seconds
(see
Note2
) to start the
Exit Delay
(see section 4.1). When the
Exit
Delay
elapses, the system will return to
Stay Arming
.
Exit and Regular Arm:
Press and hold the
[
ENTER
]
button for 3
seconds (see
Note2
) to start the
Exit Delay
(see section 4.1).
When the
Exit Delay
elapses, the system will switch to
Regular
NOTE2:
If both partitions are enabled and you activate a
One-Touch feature, buttons
[1]
and
[2]
will flash. Press
the button corresponding to the desired partition(s).
1686EU04.fm Page 23 Tuesday, August 13, 2002 10:01 AM
