20 User’s Guide
also be activated using
Auto-Arming
(see section 4.9), a
Keyswitch
(see section 4.8) or
One-Touch Arming
(see
section 4.7).
4.4.1 Instant Arming
After
Stay Arming
the system and
during its
Exit Delay
,
press
and hold the
[
STAY
]
button for 3 seconds
.
You should hear a
“
CONFIRMATION
BEEP
”. The system is then
Instant Armed
.
Therefore, any armed zone that is breached will immediately
generate an alarm.
If you have access to both partitions:
4.5 F
ORCE
A
RMING
Force Arming
allows you to rapidly arm the system without
waiting for all zones in the system to close. During
Force
Arming
, a
Force Zone
is considered “deactivated” until it
closes, then the system will arm that zone.
Force Arming
is
commonly used when a motion detector is protecting the
area occupied by a keypad. For example, when arming and
To Instant Arm one partition
To Instant Arm both partitions
1) Press the
[
STAY
]
button
1) Press the
[
STAY
]
button
2) Enter your
[
ACCESS
CODE
]
2) Enter your
[
ACCESS
CODE
]
3) Choose a partition
3) Press
[1]
4) Press the
[
CLEAR
]
button
4) Press
[2]
5) Press and hold the
[
STAY
]
but-
ton for 3 seconds
5) Press and hold the
[
STAY
]
button for 3 seconds
1686EU04.fm Page 20 Tuesday, August 13, 2002 10:01 AM
