6 User’s Guide
2.0 BASIC OPERATION
Both the
Spectra
1686H
and
1686V
LED Keypads
function
and display information the same way. The following
sections provide you with an excellent introduction to the
buttons and indicator lights on your keypad.
Many of the features in your system must be
enabled by the installer. If the feature is not
programmed, the keypad will emit a “
REJECTION
BEEP
” and the action will be cancelled. Refer to
“System Checklist” in section 8.0 for details.
2.1 A
UDITORY
F
EEDBACK
When you enter information on the keypad, it will guide you
with beep tones that communicate acceptance or rejection
of your entries. You should be familiar with these two
keypad beep tones:
Confirmation Beep:
When an operation (i.e. arming/
disarming) is successfully entered on the keypad or when the
system switches to a new status/mode, the keypad produces
an intermittent beep tone (“
BEEP
-
BEEP
-
BEEP
-
BEEP
”).
Rejection Beep:
When the system reverts to previous
status or when an operation is incorrectly entered on the
keypad, it will emit a continuous beep tone (“
BEEEEEEEEP
”).
1686EU04.fm Page 6 Tuesday, August 13, 2002 10:01 AM
