24
•
Griddle Assembly
HSL-32 Hibachi Griddle Operator Manual
Figure 18 Light Control
Electrical Precautions
The griddle must be electrically ground in accordance with local codes or, in the absence of local codes, with
the
National Electrical Code
, ANSI/NFPA 70, or the
Canadian Electrical Code, Part 1
, CSA C22.1.
Follow these precautions if an extension cord is used to connect the griddle island to an electrical supply:
•
To protect against electrical shock, never immerse cord or plugs in water or other liquid
•
Unplug from the outlet when not in use and before cleaning
•
Do not operate any outdoor cooking gas appliance with a damaged cord, plug, or after the appliance
malfunctions or has been damaged in any manner; contact Paradise Grills to discuss service options,
or call a licensed professional for inspection and repair
•
Do not let the cord hang over the edge of a table or touch hot surfaces
•
When connecting, first connect plug to the outdoor cooking gas appliance, then plug appliance into
the outlet
•
Use only a GFCI protected circuit with this outdoor cooking gas appliance
•
Never remove the grounding plug or use with a 2-prong adapter
•
Use only 12-gauge extension cords with a 3-prong grounding plug, rated for the power of the
equipment and approved for outdoor use with a W-A marking
•
Keep any electrical supply cord and the fuel supply hose away from any heated surfaces
•
The cord should be arranged so that it will not drape over the countertop or tabletop (where it can
be pulled on or tripped over)