HSL-32 Hibachi Griddle Operator Manual
Griddle Assembly
•
21
d.
Replace the burner – position the burner tube into the valve opening (Figure 11, left), then
insert the mounting pin into the hole on the far side (Figure 11 right)
Figure 11 Install Burner
3.
Before installing the griddle in any island cut-out, measure to ensure the opening is not bigger than
the outside frame of the griddle (Figure 12); the griddle edges must rest on the lip of the frame
Figure 12 Griddle Rests on Island Frame
4.
Carefully snip the zip ties around the electrical cable at the right rear corner of the griddle (Figure
13); DO NOT CUT THE WIRE
Figure 13 Electrical Cable
5.
Attach the gas supply line to the griddle per
procedure on page 25
