32
UPDATES AND REBOOTING
REBOOTING YOUR SOUNDBAR
To completely reboot your soundbar, disconnect
the power cord, wait 30 seconds, and plug it
back in. Press the power button to turn the
soundbar on. This reboot will cycle the power
off and on and force the soundbar to reconnect
to your network.
SOUNDBAR FIRMWARE UPDATE
Your soundbar Microcontroller (MCU) may
occasionally require firmware updates.
Please check www.paradigm.com for the latest
firmware updates.
DTS PLAY-FI MODULE UPDATE
The DTS Play-Fi Caprica module within your
soundbar will occasionally require a firmware
update. If an update is needed, the DTS Play-Fi
app will notify you and guide you through the
update process.
DTS PLAY-FI
®
APP UPDATE
If the DTS Play-Fi app on your mobile device or
PC requires an update, you will be notified that
an update is available and guided through the
update process.
network.
You’ll need Spotify Premium to use Connect,
see details overleaf.
1. Add your new device to the same Wi-Fi
network as your phone, tablet or PC (see
product user instructions for details).
2. Open the Spotify app on your phone, tablet
or PC, and play any song.
3. If you’re using the app on a phone - tap the
song image in the bottom left of the screen.
For tablet and PC move to step 4.
4. Tap the Connect icon
5. Pick your device from the list. If you can’t
see it, just check it’s connected to the same
Wi-Fi network as your phone, tablet or PC.
All done! Happy listening.
Licenses
The Spotify Software is subject to third party
licenses found here:
www.spotify.com/connect/third-party-licenses.
HOW TO USE CONNECT
Summary of Contents for PWSOUNDBAR
Page 1: ...OWNER S MANUAL ...
Page 41: ...40 NOTES ...
Page 42: ...41 NOTES ...
Page 43: ...MANUEL D UTILISATION ...
