26
always be set to this level when it powers on or comes
out of standby. The default level is –35dB.
Power Settings > Power-On Volume > Last Used:
When Power Standby is set to “Last Used”, the sound-
bar will power on or come out of standby at a volume
level matching the volume setting when it was pow-
ered off or went into standby.
Power Settings > IP Control: Enter the submenu by
pressing the enter button. Here you can turn IP Control
off or on. IP Control allows the soundbar to respond to
incoming IP commands from networked home control
systems connected via Ethernet or Wi-Fi.
Power Settings > IP Control > Off or On: This option
turns the IP Control feature off or on. Activate by
pressing the enter button and the soundbar will
respond with ‘Saved’.
Power Settings > Standby IP: Enter the submenu by
pressing the enter button. Here you can turn Standby IP
Control off or on. This allows you to configure how the
soundbar responds to incoming IP commands when it is
in standby mode.
Power Settings > Standby IP > Off or On: This option
turns the Standby IP Control feature off or on. Activate
by pressing the enter button and the soundbar will
respond with ‘Saved’. When this setting is set to “Off”
the soundbar will not respond to incoming IP com-
mand when it is powered off or in standby mode. If IP
Control is set to Off, Standby IP Control is disabled.
MENU OPTION: WIRELESS SETUP
Wireless Setup: Enter the submenu by pressing
the enter button. Here you may setup a Wi-Fi
connection, turn Wi-Fi on or off, reset Wi-Fi
settings, and setup a Bluetooth connection.
Wireless Setup > Initialize WiFi: Enter the sub-
menu by pressing the enter button. Resetting will
clear the soundbar’s Wi-Fi configuration. This
function requires confirmation.
Wireless Setup > Initialize WiFi > No: Activate by
pressing the enter button. Choosing this option
will exit without resetting the Wi-Fi settings.
Wireless Setup > Initialize WiFi >Yes: Activate by
pressing the enter button. The soundbar will
respond with ‘Resetting’. After a reset there is no
way to recover the settings.
Wireless Setup > Bluetooth Pairing: Enter the
submenu by pressing the enter button. Here you
may setup a Bluetooth connection.
MENU OPTION: LEARN REMOTE
Please note: There may be remotes that the
soundbar cannot learn or that the soundbar can
not learn correctly. Due to the number of avail-
able remotes, it is impossible to advise which
remotes will or will not work.
Please note: When learning from a second
remote, you will likely find it does not have but-
tons that directly correspond with all available
soundbar commands. Not all commands have to
be programmed. Some remotes offer ‘function’
buttons (F1, F2, etc.) that can be used to program
unique soundbar commands such as ‘Bass
Mode: Night’ or ‘Input: HDMI 1’.
Please note: Some remote controls offer discrete
‘power on’ and ‘power off’ buttons. Some offer
a single button to toggle power on and off. The
learning function of the soundbar allows you to
program either scenario.
Learn Remote: Enter the submenu by pressing the
enter button. The settings in this menu program the
soundbar to respond to a second remote control.
The factory supplied remote control will always
Summary of Contents for PWSOUNDBAR
Page 1: ...OWNER S MANUAL ...
Page 41: ...40 NOTES ...
Page 42: ...41 NOTES ...
Page 43: ...MANUEL D UTILISATION ...
