Pantum P3500 Series User Manual Download Page 76

Page: 76 / 99

7-7

7.4.3. Printing with Optional Tray

7.4.3.1. Installation of Optional Tray

1. Please ensure the correct placement of the printer and the optional trays, as shown below.

2. Plug the power cord into the printer to turn on the power.

Note:

• Please cut off the power supply of the printer when install or remove the optional

tray.

•

After the installation of the optional tray, please do not lift the printer up during

the printing process, or else, the communication with the optional tray will fail.
Users will need to restart the printer to restore in this case.

3. Open "Printer Properties" on the Device and Printer interface of the operating system,
and click "Secondary Settings", select "Installed" in the "Installable Options" to complete the

installation of the optional tray, as shown in the figure.

Summary of Contents for P3500 Series




































































































Search results

Summary of Contents for P3500 Series

Reviews:

Related manuals for P3500 Series

Brands by name

Popular brands

Pantum P3500 Series, User Manual

Search results

Summary of Contents for P3500 Series

Reviews:

Related manuals for P3500 Series

Brands by name

Popular brands