11
the tray
External
large-capacity
tray
Media Type
Plain paper (60-90 gsm), thick paper 1 (91-120 gsm), thick paper 2
(121-157 gsm), thick paper 3 (158-209 gsm), thick paper 4
(210-256 gsm)
Media size
A4-Long Side
Media weight
60~256gsm
Maximum
capacity
of
the tray
3000 pages
Built-in
large-capacity
tray
Media Type
Plain paper (60-90 gsm), thick paper 1 (91-120 gsm), thick paper 2
(121-157 gsm), thick paper 3 (158-209 gsm), thick paper 4
(210-256 gsm)
Media size
A4-Long Side
Media weight
60~256gsm
Maximum
capacity
of
the tray
2500 pages
Note:
• 80 g/m² standard paper is recommended for this printer.
• It is not recommended to use special paper extensively, which may affect the service life of the
printer.
• The print media that does not meet the guidelines listed in this User Guide may result in poor
print quality, increased paper jam and excessive wear of the printer.
• Properties such as weight, composition, texture and humidity are important factors affecting the
printer performance and output quality.
Please note the following matters when selecting the print media:
1. Desired print effect: The print media selected should meet the requirement of the print tasks.
2. Surface smoothness: The smoothness of the print media may affect the sharpness of the print
outcome.
3. Some print media may meet all the use guidelines contained herein, but they still can not bring
satisfactory effect. This may be due to incorrect operation, inappropriate temperature and humidity,
or other factors beyond the control of Pantum. Before purchasing large quantities of print media,
make sure that the print media meets the specifications specified in this User Guide.
Summary of Contents for M9106 Series
