8
5
ID copy
Access to “ID copy” menu and make an ID card copy.
6
Switch Language
Click the "Switch Language" button to switch the language.
7
Secure Print
Access the “Secure Print” menu and print the secure print
job.
8
Error
status
indication
• This icon will be displayed when there is an error for
troubleshooting in the machine.
9
Tips/Warnings
• This icon will be displayed when there is any tip/warning
for processing in the machine.
10
Wired network status
icon
• Check printer wired network information.
•
The icon will become gray with a red cross sign on it, when
the wired network is not connected.
11
Security Management
Access the “Lock Screen Password” and “Job Control”
menus and make settings.
12
Shortcut center
Access the "Shortcut Center" menu and configure the
shortcut settings for copying.
13
“Settings” button
Access the “General Settings” menu to set the general
functions of the printer.
14
Network Settings
Access the “Network Settings” menu and inquire the
network settings and network information.
15
Consumable
information
Access the “Consumables Information” menu and inquire
the consumables information of printer.
16
Information report
Access the “Information Report” menu and print the
information report.
Summary of Contents for M9106 Series
