PANTHERA MOTORSPORTS
PANTHERA CR500 E-START Installation guide
Installation
CRF450x Stator
The starter unit will require to run oil in the flywheel compartment. To do so, you will have to block the
CR500 flywheel vent hole. Use silicone or any other sealing compound that has oil sealing capability.
Figure 1 Vent sealing
As you receive your unit, the new CRF450X stator will be already bolted, loctited and troque to its
backplate.
Bolt the new stator unit to the cases with two button heap cap screw. The stator plate as angle goes
from +3 to -3 deg, zero being in the middle position.
Figure 2 Stator installation
