D
UAL
B
LADE
R
OOF
C
UTTER
I
NSTRUCTION
M
ANUAL
Copyright © 2009, Panther Products Corporation, Harrisonville, MO
Page: 7
PRE-OPERATING CHECKLIST
Read and follow owners manual supplied by engine, and bearing manufactures. Check oil
and fuel levels, fill to manufacturers specified levels
.
VISUALLY INSPECT SAW
— Cooling fins on engine and transaxle should be free of debris and gravel.
— Blades should be straight and have a good cutting surface.
( Never attempt to cut with a damaged blade.)
— Fresh air intake should be fastened to the machine and have no holes.
— Transaxle fan should be free of debris.
— Blade guard should move up and down freely.
— Belts should be in good operating condition.
— Air cleaner should be cleaned daily by lightly tapping it against a hard surface.
— Belt guards should be in place, secured properly and tightly.
WARNING:
R
UNNING
SAW
WITHOUT
BELT
GUARDS
PROPERLY
IN
PLACE
WILL
VOID
THE
WARRANTY
.
