Panther DUALBLADEROOFCUTTER Instruction Manual Download | Manualshive

Page: 15 / 17

background image

D

UAL

B

LADE

R

OOF

C

UTTER

I

NSTRUCTION

M

ANUAL

Copyright © 2009, Panther Products Corporation, Harrisonville, MO

Page: 15

INSTRUCTONS TO REPLACE BELTS ON DUAL BLADE ROOF CUTTER

LOOSEN THE FOLLOWING IN ORDER

PART# DESCRIPTION QTY. LOCATION

Step 1       34        1/2”-12 Locknut              1         Idler pulley, inside the belt
                                                              guard

Step 2       69        1/2”-13 nut                 1         Below #42 belt idler mount on
                                                              left side belt guard

Step 3       87        Belt idler bolt             1         Though #42 belt idler mount
                                                              of the left side of belt guard

Step 4       36          7/16”-14X1” bolt               1         On inside of belt guard
                                                             fastened to engine

Step 5       91           7/16”-14 nut               4         Mounts engine on frame

Step 6       69        1/2”-13 nut                 3         On #102 belt alignment side
                                                              on left side of main frame

Step 7       108            Belt tightener nut           1         Sticks out of front of main
                                                              frame

REMOVE

Step 8 49 1/2”-13X2 bolt 4 Mounts, main shaft to main
frame

Replace belts, 4 Gates super HC 3VX425 and reinstall and tighten the above in the reverse order.

NOTE: All 4 belts must be replaced as matching sets from one manufacturer.

Belt alignment = within 1/16”

«
...
13
14
15
16
17
»

Summary of Contents for DUALBLADEROOFCUTTER


















Reviews:

No comments

Related manuals for DUALBLADEROOFCUTTER

Brand: Uni-max Pages: 20

ESSENTIAL OXYCUTTING

Brand: Lincoln Electric Pages: 42

Brand: QEP Pages: 8

Brand: KEENCUT Pages: 21

Brand: Land Pride Pages: 1

Brand: Amkus Pages: 4

Brand: Hypertherm Pages: 69

Brand: Valex Pages: 28

Bradco Extreme Duty Ground Shark Series

Brand: paladin Pages: 35

Brand: Laski Pages: 40

EXCALIBUR 1000X

Brand: KEENCUT Pages: 54

Brand: Duplo Pages: 27

Brand: Makita Pages: 100

Brand: Panasonic Pages: 22

Brand: GMC Pages: 52

Brand: Jet Pages: 20

Brand: Rayco Pages: 49

Brand: Rayco Pages: 62

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands