D
UAL
B
LADE
R
OOF
C
UTTER
I
NSTRUCTION
M
ANUAL
Copyright © 2009, Panther Products Corporation, Harrisonville, MO
Page: 8
CONTROLS
A.
Hydraulic release = Move this lever to the left when you want to push the dual blade
roof cutter around freely.
B.
Instruction Tube = This is where all the dual blade roof cutter manuals will be found.
C.
Depth Control = Controls the depth of the cut as well as hold the blade out of the
roof when not cutting. To lower the blade into the roof push down on the handle and
guide the depth control through the hole in the console. To cut deeper turn the
depth control clockwise, to cut shallower, turn the depth control counter clockwise.
To lock the blade out of the roof, simply push down on the handles until the depth
control falls into slot in the console.
D.
Throttle Lever = Pushing this lever to the left increases engine and blade RPM while
pushing it to the right, decreases RPM.
E.
Choke = Pull this knob to choke the engine during cold startups.
F.
Hour Meter = Keeps track of the hours the dual blade roof cutter has operated.
G.
Light Switch = Turns the head light on and off.
H.
Engine Switch = Turning this switch to the right will start your dual blade roofcutter.
I.
F/R Lever = Pushing forward on this lever will propel the dual blade roofcutter
forward and pulling back on it will propel the dual blade roofcutter in reverse.
CAUTION:
Never stand behind the Dual Blade Roofcutter
when it is moving in reverse.
J.
Handle Bar = This is where your hands will be placed while operating your dual
blade roof cutter.
K.
Forward Handle = Squeezing this handle will propel your dual blade roofcutter
forward at the speed suitable for cutting.
l.
Forward handle speed adjustment = Controls the top speed, the forward handle will
allow the dual blade roofcutter to travel.
M.
Parking Brake = Keeps machine from vibrating into forward or reverse when in idle
mode
.
