Panta Rhei Hydro Wizard ECM 63, User Manual, Page: 5 / 36

5
When used in any aquariums and ponds this device
should be plugged into a GFI socket with no more than
30mA power. If persons are in the aquarium or pond the
pump must be turned off.
Safety
General Safety
Read before using this product!

The pump should be plugged into a GFI socket with 100-240V ~
50/60Hz; fuse of 10A.
 Use pump in closed rooms for aquarium applications!

The controller must not be submerged in water.
 If the cables are visibly damaged the pump must not be
used. Do not attempt to repair the cables yourself.
 The pump must not be lifted, carried or attached by the cable.
 The motor must only be used when submerged. Running the
pump dry will damage the bearings. Guarantee and liability are
void if damage is due to the pump running dry.
 This device is not meant to be used by persons (including
children) with limited physical, sensory, or mental capacities or
insufficient experience and/or insufficient knowledge. Unless
they are supervised by a person responsible for their safety and
are instructed how this device is to be used.

The user is responsible for complying with local safety laws.

The user is liable for damage to third persons caused by this
product.
 This pump has been designed exclusively to move salt and
freshwater. Usage in corrosive, flammable or explosive liquids is
not permitted. The temperature of the water should not be above
35C (95F).
 The operating temperature of this pump is between 5C and 35 C
(41-95F).

Do not operate damaged, incomplete, or modified (without
consent of the manufacturer) pumps. Ask an electrician to verify
that all electric safety measures have been followed.
 Please read the section on care and maintenance in this
manual. All other measures, including the opening of the pump,
power supply or controller are not permitted. In case of required
repair always contact the manufacturer.