Panta Rhei Hydro Wizard ECM 63, User Manual, Page: 21 / 36

21
To find the ideal frequency in your aquarium select “find frequency” in
the settings menu. Now select the maximum flow strength. The wave
frequency will then be lowered slowly. When the waves have reached
an optimal frequency it can be accepted by pushing “select” on the
display.
Caution: depending on the layout of your aquarium waves can
damage the contents, or spill water over the sides.
To generate a wave in the aquarium the frequency must be set
perfectly. Each tank has a different frequency. The intensity of the
wave can be best controlled by the strength of the flow!
Profile mode
The profile mode is used to start or stop the wave or flow mode
automatically. This allows waves or flow to be controlled individually for
different time intervals.
To best understand the function of the wave and flow modes please
read the wave mode and flow mode sections of this manual.
After selecting the profile mode you can add, change or delete intervals
in the settings menu (or the quick access menu from the info screen).
When adding a new interval the start and end time must be entered
first. After this select the mode during this time period and the
parameters.
Remember that the hydro wizard will change from one mode to
another when it changes the interval. Make sure large waves do
not splash water over the sides or destroy the aquarium.
ALWAYS test each of the settings for each mode you will use
before adding it as an interval in profile mode.