Panta Rhei Hydro Wizard ECM 63, User Manual, Page: 13 / 36

13
Controller Instructions
(Firmware 3.0.x)
Controlling the hydro wizard©
The controller can be programmed with your finger, or a non abrasive
touch screen pen. All touch surfaces can be easily reached with your
finger. When activating a field it will be displayed with a black
background. When the finger is removed it will be confirmed.
Figure 1: Touch screen surface confirmation
The following will explain the most important fields of the touch screen.
Warning: for maintenance
ALWAYS
disconnect the hydro wizard
from the power grid. Do not use any of the following stop functions
to perform maintenance on the hydro wizard!
The Information Screen
The information screen displays information about the flow status of the
pump. The upper part of the screen displays the flow mode. The center
part of the screen will display the most important data about the flow
mode.
Figure 2: Information screen
Display active
mode / stop
Display: flow
setting and
performance
time
Stop hydro wizard
®
go to Main Menu