Panta Rhei Hydro Wizard ECM 63, User Manual, Page: 27 / 36

27
Cleaning function
The cleaning function will help to clean off debris (like plants) that has
stuck to the intake of the pump. To achieve this, the pump will spin in
the opposite direction for a short time. The cleaning function is reached
from the main menu.
The frequency of the automatic cleaning function can be set in the
menu. It is also possible to change from short time to long time
cleaning
The manual cleaning function allows you to select forward and reverse
flow strength.
Caution: Using the cleaning mode for other purposes can damage
the hydro wizard.
Caution: The cleaning mode does not replace the regular cleaning.
The Pause / Feed timer
The pause/feed timer stops the hydro wizard and automatically
resumes the programmed settings after an elapsed time (i.e. during
feeding).
The feed timer function can be reached from the main menu. Select the
beginning of the pause, stop the pause, and duration of the pause. The
quick access menu can active a quick access button that will be
displayed during a “Stop”in the info screen.
Never use the pause / feed timer to perform maintenance or
cleaning the hydro wizard.
Unit Settings
Selecting “ unit ” in the main menu controls the settings for the display.
The menu selection “
Tooltip ” is used to active the display of other
information from a selected menu. The tooltips are displayed at the
bottom of the screen.
The menu item "
dimming " is used to lower the brightness of the
display when the touchscreen is activated.