BA_PH_245-100-300_EN_06-22.docx
9
3
General
The models 245|100, 245|200 and 245|300 are universal tilting spindle moulders with height and tilt adjustable
milling arbor, two directions of rotation, quick tool change device, adjustable speed as well as separately adjust-
able total and partial fence.
•
The milling spindle is driven by a three-phase motor.
•
The four speeds of the 245|100 version (3000 / 4500 / 6000 / 9000 rpm) can be adjusted by flipping the
pulley via the belt quick tensioning device.
•
On the 245|200 and 245|300 versions, the speed can be infinitely adjusted from 1500 to 10000 rpm via a
frequency inverter. The set speed is visualised on the touchscreen.
•
The milling spindle is mounted dust-tight. Special ball bearings and careful alignment of all moving parts
give the machine smooth running.
•
The milling arbor is designed for clockwise and anti-clockwise rotation and is secured against rotation. It
has a quick-change tool device, which means that the milling spindle does not have to be locked.
•
For all models, the quick-change milling arbor type "HSK 80" with nut and hook spanner (without collet) is
optionally available. Depending on the shaft diameter, the necessary collets are required.
•
As further options, the two models 245|200 and 245|300 can also be equipped with the tool-free quick-
change system "HSK 85 Powerlock" or with the CNC-compatible, automatic tool change system "HSK63-F".
•
The height and tilt adjustment is carried out automatically via the UT 300 position control unit.
•
The finely planed cast iron machine table has the dimensions 1100 x 760 mm and is provided with a rigid
frame support. Extendable frame supports as well as a turntable are optionally available.
•
Also optionally available is a larger table top with the dimensions 1340 x 800 mm.
This larger version is available with or without a matching turntable.
•
For both table sizes, single-sided and double-sided table extensions are available as accessories.
•
The control panel contains the UT-300 position controller for positioning the four axes, the ON/OFF switch
for the spindle, the positioning keys, the direction of rotation switch, an emergency stop push-button, a
USB slot for software updates and backups as well as other operating switches (depending on equipment).
•
The control panel can be attached either at eye level at the top or at table level on the frame support.
•
The lockable main switch is mounted on the machine stand.
•
A machine socket (e.g. for connecting a feeding unit) is fitted in the rear right-hand side of the machine.
•
CE-compliant design.
3.1
Positioning with the Ultimo Touch 300 controller
Apart from the mechanical operating elements of the machine, operation is carried out via the Ultimo Touch 300
position controller.
•
For all operating details, please refer to the separately enclosed operating instructions of the UT 300 posi-
tion controller
BA_PH_UT300_EN
.