BA_PH_245-100-300_EN_06-22.docx
66
Continuation “Milling Fences”
Article
Description
Art.-No.
SWIVEL-AWAY DEVICE
Electromotive lifting and lowering, the fence can be rotated 360°
around the guide column and swivelled away to the front.
4627
1 SET SAFETY RULERS
‘FOR MILLING FENCES
As continuous guide between the two fence plates consisting of: 2
pieces rulers 260 x 6 mm, 3 pieces rulers 260 x 3 mm, 1 grooved board
(multiplex) 260 x 150 x 12 mm, incl. sliding blocks and Allen key.
2093
INTEGRAL FENCE SYSTEM
INFEED/OUTFEED SIDE
500 + 500 MM
The swivelling guide rods integrated in the fence plates ensure a guide
surface without gaps for all milling operations; the exact adjustment
to the tool diameter and height is achieved by a stepless adjustment.
Usable instead of standard cast fence plates.
4170
INTEGRAL FENCE SYSTEM
INFEED/OUTFEED SIDE
650/500 MM
The swivelling guide rods integrated in the fence plates ensure a guide
surface without gaps for all milling operations; the exact adjustment
to the tool diameter and height is achieved by a stepless adjustment.
Usable instead of standard cast fence plates.
4169
INTEGRAL FENCE SYSTEM
INFEED/OUTFEED SIDE
650/650 MM
The swivelling guide rods integrated in the fence plates ensure a guide
surface without gaps for all milling operations; the exact adjustment
to the tool diameter and height is achieved by a stepless adjustment.
Usable instead of standard cast fence plates.
4171
CENTREX
MILLING PROTECTION
AND PRESSURE DEVICE
For secure fixing of workpieces during manual milling work; the spe-
cial shape of the pressure shoes ensures precise workpiece guidance
during all milling work, attached to the milling fence, can be folded
upwards. Usable instead of the standard protection and pressure de-
vice GAMMA V 1629.
2220
20.4
Milling Spindles and Arbors
Article
Description
Art.-No.
MILLING SPINDLE Ø 1 ¼"
Not interchangeable, dynamically balanced for optimum concen-
tricity, clamping height 140 mm with cutter arbor rings and cutter
quick-clamping device via Allen key with anti-rotation lock, instead of
30 mm standard milling spindle.
4153
MILLING SPINDLE Ø 35 MM
Identical to Art.-No. 4153.
4150
MILLING SPINDLE Ø 40 MM
See Art.-No. 4153, but clamping height = 160 mm.
4151
MILLING SPINDLE Ø 50 MM
See Art.-No. 4153, but clamping height = 160 mm.
4152
MILLING ARBOR QUICK
CHANGE SYSTEM HSK-80
With spindle lock and 30 mm milling arbor, instead of the 30 mm
standard milling spindle (higher concentricity and no sticking in the
spindle as with the MK 5 system or steep taper).
4635
ARBOR HSK-80, Ø 1 ¼"
Quick-change milling arbor with 140 mm clamping length, dynami-
cally balanced for optimum concentricity incl. milling arbor rings and
anti-rotation lock. Milling arbor change with Allen key.
4517
ARBOR HSK-80, Ø 30 MM
Identical to Art.-No. 4517.
4443
ARBOR HSK-80, Ø 35 MM
Identical to Art.-No. 4517.
4549.2
ARBOR HSK-80, Ø 40 MM
See Art.-No. 4517, but clamping length = 160 mm.
4444
ARBOR HSK-80, Ø 50 MM
See Art.-No. 4517, but clamping length = 160 mm.
4549.3
COLLET ARBOR HSK-80
Quick-change arbor with nut and hook spanner (without collet). Dy-
namically balanced for optimum concentricity for holding shaft tools,
depending on the shaft diameter, the necessary collets are required.
4560
Continuation see
next page