USER MANUAL
UPS00100DC
©
Panduit Corp. 2018
IA-CD-0009 Rev. 07
Page
18
of
46
Figure 7: System Wiring Diagram
Warning:
A disconnect switch is required on the input circuit in accordance with the National Electric
Code, ANSI/NFPA 70.
4.5.1.
ON/OFF POWER SWITCH
This toggle switch enables operation of the UPS when it is set to the “ON” position. When set to the
“OFF” position, the LEDs will be OFF and there will be no voltage present on any of the output (OUT)
terminals, making the UPS safe for installation or servicing downstream equipment.
Figure 8: UPS ON/OFF Switch Positions
1
0
