USER MANUAL
UPS00100DC
©
Panduit Corp. 2018
IA-CD-0009 Rev. 07
Page
12
of
46
2.13.
Maintenance
•
State of Health (SOH) - Capacity remaining until End of Life
o
20 years at 20°C maximum UPS ambient temperature
o
5.8 years at 40°C maximum UPS ambient temperature
o
1.8 years at 60°C maximum UPS ambient temperature
3.
PRECAUTIONS AND GENERAL GUIDELINES
The basic condition for safe use and proper operation of the UPS is the knowledge and attention to the safety
information provided in this manual. The following safety information must be observed by all personnel working
with the UPS. All rules and instructions for the work place must be observed especially those pertaining to the
prevention of accidents.
The information and instructions contained in this document are not intended to be utilized as a substitute for
proper training and experience in the safe installation and operation of said product. Prior to installation, it is the
owner’s responsibility to consult with the appropriate local Authority Having Jurisdiction (AHJ) for all applicable
codes, permits, regulations, and standards.
This product, should only be installed and serviced by a licensed electrical contractor, or competent
technician that meets the following qualifications:
•
Is thoroughly familiar with this product and the instructions for installation and operation.
•
Is trained (accredited) in industry-accepted safe operating practices and procedures regarding identification
and mitigation of high and low-voltage hazards and situations.
•
Is trained to identify and install appropriately-sized Branch Circuit Disconnect(s) with appropriately-sized
Branch-Circuit Protective Rating and Short-Circuit Current Rating (SCCR) before connecting any Panduit
product to the branch circuit.
•
Is trained and authorized to energize, de-energize, clear, and ground power distribution equipment.
•
Is trained in the care and use of PPE (personal protective equipment) including, but not limited to: arc-flash
protective clothing, safety glasses, face shield, hard hat, gloves, and non-conductive tools (clamp stick, hot
stick, etc.).
This symbol is used to call your attention to hazards or unsafe practices which could result in an
injury or property damage. The signal word, defined below, indicates the severity of the hazard.
The message after the signal word provides information for preventing or avoiding the hazard.
WARNING
Hazards which, if not avoided, COULD result in severe injury or death.
CAUTION
Hazards or unsafe practices which, if not avoided, MAY result in injury or
property damage.
