SMARTZONE UPS USER MANUAL
37
Screen #
Parameter(s) Name(s)
Example Display Content
M-07
(DC)
Base UPS Core FW Version &
Alert Code (Alarm/Faults)
(Normal Mode)
The above page is an example of the Core Firmware Version monitoring page on
a VRLA Double Conversion system that is operating in the Bypass state.
The Alert Code in the center brackets, (refer to
) may appear on any Monitor Operation page when the UPS
has an active alert. The error icon will also light in the upper left corner of the
page, in most cases (if there is an internal error) the UPS will also transion to the
Bypass state.
M-07
(LI)
Base UPS Core FW Version &
Alert Code (Alarm/Faults)
(Normal mode)
The above page is an example of the Core Firmware Version monitoring page on
a Li Line interactive system that is operating in the Normal State.
The Alert Code in the center brackets, (refer to
) may appear on any Monitor Operation page when the UPS
has an active alert. The error icon will also light in the upper left corner of the
page.
Setup Operation
One must intentionally get into the Setup Operation mode by a sequence of function
button operations. Press and hold the UP and DOWN buttons at the same time until the
unit a Setup page appears. Once in the Setup Operation mode, use the UP or DOWN
