SMARTZONE UPS USER MANUAL
46
Screen #
DC Li Settings
Content display
S-08A
BYPASS Enable setting
(ON, OFF)
The default Bypass Enable setting is ON. This allows the UPS to switch to the
Bypass state if it needs to.
S-08B
BYPASS Setting
(ON, OFF)
To disable the Bypass set this to OFF.The UPS will not be allowed to transition to
the Bypass state under any circumstances.
Line Interactive Li UPS
These UPS units are for the North American markets only.
The Line Interactive Lithium-Ion UPS has five Setup pages. Remember that scrolling
down through the 5
th
Setup page will automatically save any settings changed during
the Setup session and transition back to the Monitor Operation mode.
The following table shows an example and description of all 5 setup pages in the Line
Interactive Li UPS unit.
