SMARTZONE UPS USER MANUAL
18
Output Circuit Breakers (BREAKER)
Some UPS units have output circuit breakers to protect from load overload conditions,
labeled with
BREAKER
and a line to the outlet group it protects on the back of the unit.
Refer to the corresponding Customer Documentation for details.
1kVA North America Model Rear Panels (U01x11V / U01x13V / U01x11L)
The 1kVA North American (NA) UPS units have a permanently connected input power
cord with a NEMA 5-15 plug. These units have two groups of outlets. Group 1 (4x 5-
15R) outlets are the main outlets that are not switchable. These outlets should contain
the critical loads. Group 2 (2x 5-15R) are switchable outlets. These outlets could contain
the non-critical loads. When the UPS is operating in the battery state, Group 2 outlets
may be programmed to turn off earlier to conserve battery capacity for the Group 1
outlets.
Figure 4: 1kVA VRLA NA Rear Panel View (U01x11V & U01x13V)
Figure 5: 1kVA Li NA Rear Panel View (U01x11L)
2kVA and 1.5kVA North America Model Rear Panels (U02x11V / U02x11L)
The 2kVA VRLA unit has a permanently connected input power cord with a NEMA 5-
20P plug. The 1.5kVA Li unit has a permanently connected input power cord with a