INSTRUCTIONS FS149A
For Technical Support: www.panduit.com/resources/install_maintain.asp
Fasten Hook-n-Loop
through mounting hole in
side of partition wall to
cable at rear of cassette
Figure 47
Figure 48
Bundle 1
Bundle 2
Bundle 3
Bundle 4
Install and route cables though 4RU
cable manager at each side of enclo-
sure toward the front of each cas-
sette, starting with the lowest cable
bundle 1 and working upward to
cable bundle 4. Secure each bundle
to the 4RU cable manager with hook-
n-loop (as shown in Figure 48).
Page 18 of 19
Secure cables at rear of cassette through mounting holes in side of wall (shown in Figure 47) with hook-n-loop.
BUNDLE
INSTALLATION
SEQUENCE OF
CABLES AT
FRONT OF
CASSETTE
3.C Cable Installation at Front of Cassette
Install cassettes and cables at rear of cassette (as depicted in Figures 7 through 8).
Then route cassettes and fiber cable following directions 3 through 5.C from Section 3.0
3.B Cassette and Cassette Rear Cable Installation
