INSTRUCTIONS FS149A
For Technical Support: www.panduit.com/resources/install_maintain.asp
(optional slack plate removed for clarity)
Figure 29
Figure 30
Cassettes can be removed from the front of the patch panel as
needed for replacement or migration. Disconnect patch cords
from the front of the cassette. Press the latch away from the
module and pull the module forward. Once the module is pulled
past the latch, the module can be completely removed. (See
Figure 29).
Disconnect trunk cable from the rear of the cassette and con-
nect it to the rear of the replacement cassette. Re-install cas-
sette or MPO FAP opposite the way it was removed. Align the
rear of the cassette or MPO FAP in the opening and push inward
until the cassette snaps into position near the front/center, until it
clicks into place. Re-attach patch cords (for cassette changes).
(See Figure 30).
Figure 31
MPO FAP
Port 1
1
6
If migrating to an MPO FAP, connect the MPO trunk
cable to the left most position, port 1 (as shown in
Figure 31).
Page 12 of 19
4-Port / 6-Port Cassette Rail Removal Installation
HD Flex MPO Fiber Adapter Panel (FAP) Usage
