Panduit Atlona AT-HDVS-SC-RX Manual Download

Page: 8 / 41

AT-HDVS-SC-RX

The Atlona

AT-HDVS-SC-RX

is an HDBaseT receiver and 4K/UHD scaler with a local HDMI input. It receives

HDBaseT for video output up to 4K/30 4:4:4, plus embedded audio, control, and Ethernet over distances up to

330 feet (100 meters). The HDVS-SC-RX features Atlona CrystalScale technology with high-quality downscaling

and upscaling, as well as advanced image optimization capabilities plus internal test patterns for setup and

troubleshooting. The HDVS-SC-RX is ideal for 4K presentation applications with HDVS-200 and Omega

™

Series

switching transmitters, EX Series transmitters, Atlona AV switchers with HDBaseT outputs, and local HDMI sources,

and the Gain

™

60 amplifier. The HDVS-SC-RX and HDVS-200 or Omega Series transmitter together serve as a

compact, fully automated AV system with the convenience of automatic input selection, display control, remote

transmitter powering through Power over Ethernet (PoE), and 4K/UHD scaling.

Introduction

Features

Package Contents

•

HDBaseT™ receiver with local HDMI® input

• Advanced 4K/UHD scaling featuring all-new, Atlona CrystalScale

™

technology

•

Pristine-quality downscaling and upscaling

• Aspect ratio control
•

Image optimization for flat-panel and LED tiled displays

• Advanced motion-adaptive deinterlacing for 1080i input signals
•

Exclusive image-optimization features for flat panel and LED tiled displays

•

Internal video test patterns for setup, calibration, and troubleshooting

•

Automatic input selection and automatic display control using IP, RS-232, or CEC

• Contact closure for screen or display lift control
•

Audio de-embedding

1 x AT-HDVS-SC-RX

1 x Captive screw connector, 2-pin

1 x Captive screw connector, 3-pin

2 x Captive screw connectors, 5-pin

1 x 24 V DC power supply

1 x Installation Guide

Summary of Contents for Atlona AT-HDVS-SC-RX










































Search results

Summary of Contents for Atlona AT-HDVS-SC-RX

Reviews:

Related manuals for Atlona AT-HDVS-SC-RX

Brands by name

Popular brands

Panduit Atlona AT-HDVS-SC-RX, Manual

Search results

Summary of Contents for Atlona AT-HDVS-SC-RX

Reviews:

Related manuals for Atlona AT-HDVS-SC-RX

Brands by name

Popular brands