background image

AT-HDVS-SC-RX

5

•  Damage, deterioration or malfunction resulting from the installation or removal of this product from any 

installation, any unauthorized tampering with this product, any repairs attempted by anyone unauthorized by 

Atlona to make such repairs, or any other cause which does not relate directly to a defect in materials and/or 

workmanship of this product.

• 

Equipment enclosures, cables, power supplies, batteries, LCD displays, and any accessories used in conjunction 

with the product(s).

• 

Products purchased from unauthorized distributors, dealers, resellers, auction websites and similar unauthorized  

channels of distribution.

Disclaimers

This Limited Product Warranty does not imply that the electronic components contained within Atlona’s products 

will not become obsolete nor does it imply Atlona products or their electronic components will remain compatible 

with any other current product, technology or any future products or technologies in which Atlona’s  products may 

be used in conjunction with.  Atlona, at its sole discretion, reserves the right not to extend its warranty offering in 

instances arising outside its normal course of business including, but not limited to, damage inflicted to its products 

from acts of god.

Limitation on Liability

The maximum liability of Atlona under this limited product warranty shall not exceed the original Atlona MSRP for 

its products.  To the maximum extent permitted by law, Atlona is not responsible for the direct, special, incidental or 

consequential damages resulting from any breach of warranty or condition, or under any other legal theory. Some 

countries, districts or states do not allow the exclusion or limitation of relief, special, incidental, consequential or 

indirect damages, or the limitation of liability to specified amounts, so the above limitations or exclusions may not 

apply to you.

Exclusive Remedy

To the maximum extent permitted by law, this limited product warranty and the remedies set forth above are 

exclusive  and in lieu of all other warranties, remedies and conditions, whether oral or written, express or implied. 

To the maximum extent permitted by law, Atlona specifically disclaims all implied warranties, including, without 

limitation, warranties of merchantability and fitness for a particular purpose.  If Atlona cannot lawfully disclaim 

or exclude implied warranties under applicable law, then all implied warranties covering its products including 

warranties of merchantability and fitness for a particular purpose, shall provide to its products under applicable law.  

If any product to which this limited warranty applies is a “Consumer Product” under the  Magnuson-Moss Warranty 

Act (15 U.S.C.A. §2301, ET SEQ.) or other applicable law, the foregoing disclaimer of implied warranties shall not 

apply, and all implied warranties on its products, including warranties of merchantability and fitness for the particular 

purpose, shall apply as provided under applicable law.

Other Conditions

Atlona’s Limited Product Warranty offering gives legal rights, and other rights may apply and vary from country to 

country or state to state. This limited warranty is void if (i) the label bearing the serial number of products have been 

removed or defaced, (ii) products are not purchased from an authorized Atlona dealer or reseller. A comprehensive 

list of Atlona’s authorized  distributors, dealers and resellers can be found at www.atlona.com.

Atlona, Inc. (“Atlona”) Limited Product Warranty

Summary of Contents for Atlona AT-HDVS-SC-RX










































Reviews: