P&E Microcomputer Systems Cyclone FX Series Page 142 User Manual Download | Manualshive

Page: 142 / 149

background image

User Manual For Cyclone LC Programmers

142

$3014: Error: Run Test Operation terminated
$3015: Error: Run Test Operation over character limit 255
$3016: Error run test operation failed
$3017: Error: unable to allocated memory during run test.
$3018: Error: Dynamic operation failure. Algorithm is not loaded. Check image settings.
$3040: Error: Program may cause the device to be secured permanently

15.9

SAP Verify Checksum Related Errors

$4001: Verify Checksum not supported
$4002: VC failed, invalid algorithm was used
$4003: VC operation failed or was canceled
$4011: VV command not supported
$4012: VV failed, invalid algorithm was used
$4013: VV operation failed or was canceled

15.10

SAP Verify Range and Module Related Errors

$5003: Error during verifying module.

15.11

SAP User Function Related Errors

$6003: Error during user functions.

15.12

SAP Trim Related Errors

$7001: Program Trim operation is not supported
$7003: No target response during a Program Trim operation
$7004: Program Trim error. Trim value is not set
$7007: Program Trim error. Trim value failed
$7008: Trim error. Trim value read failed
$7009: Trim value invalid, value is $00 or $FF
$700A: Trim value is invalid. Trim value is already programmed.

15.13

Unrecoverable Fatal Errors

$8001: Fatal Error: please contact PEmicro.
$8002: Fatal Error: please contact PEmicro.
$8003: Fatal Error: please contact PEmicro.
$8004: Fatal Error: please contact PEmicro.
$8005: Fatal Error: please contact PEmicro.
$8006: Fatal Error: please contact PEmicro.
$8007: Fatal Error: please contact PEmicro.
$8008: Fatal Error: please contact PEmicro.
$8009: Fatal Error: please contact PEmicro.
$800A: Fatal Error: please contact PEmicro.
$800B: Fatal Error: please contact PEmicro.
$800C: Fatal Error: please contact PEmicro.
$800D: Fatal Error: please contact PEmicro.

«
...
140
141
142
143
144
...
»

Summary of Contents for Cyclone FX Series






















































































































































Reviews:

No comments

Related manuals for Cyclone FX Series

Brand: Texas Instruments Pages: 30

IP-M945A SERIES

Brand: WEALTHTEC Pages: 72

Brand: MaxLinear Pages: 25

Brand: Texas Instruments Pages: 23

Brand: Zamel Pages: 2

Brand: Intel Pages: 12

Brand: H-Tec Pages: 28

Brand: Commell Pages: 53

Brand: Texas Instruments Pages: 20

Brand: Intel Pages: 26

Brand: Albatron Pages: 57

Brand: BESTEK Pages: 13

Brand: Linear Technology Pages: 6

Brand: Micronics Pages: 80

Brand: ASROCK Pages: 106

Brand: Supermicro Pages: 107

Brand: NXP Semiconductors Pages: 35

Brand: NXP Semiconductors Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands