User Manual For Cyclone LC Programmers
130
Figure 12-5: Cyclone Menu Selection
It is possible to Decrease or Increase the Next Serial by -10, -1, +1, +10. This is often done to
address issues in the production process, such as during initial setup.
Figure 12-6: Increase or Decrease Serial Number
Note that the Cyclone Control GUI has the ability to show all the Serial Files stored on the Cyclone.
This is done by opening a Cyclone, and then navigating to the Serial Files Tab, as shown in
. The Serial File tab has a Delete Button at the bottom which will remove the selected serial
file from view and reset the tracking of the serial number to its original state. This does not actually
delete the serial file. Once any programming is initiated using this ‘deleted’ serial file, the serial file
will reappear back in the list and program using the original serial number.
