Panda MD2000 User Manual Download Page 2

Page: 2 / 84

Notice

Ensure that the optional DC adapter works at +5V, especially for the RS-232 interface

cable.

Make sure you carefully read the following information to ensure that your barcode scanner is able to

perform at the designed level.

1. All software, including firmware, furnished to the user is on a licensed basis.

2. The right is reserved to make changes to any software or product to improve reliability, function, or

design.

3. The material in this manual is subject to change without notice.

4. A standard packing includes a scanner, a USB cable and a CD (or a user manual). Accessories

include a stand, a 5V adaptor and a RS-232 cable.

5. The Auto-detection is an optional accessory.

6. Different firmware version have the different functions, please make sure you get the right version.

Summary of Contents for MD2000





















































































Search results

Summary of Contents for MD2000

Reviews:

Related manuals for MD2000

Brands by name

Popular brands

Panda MD2000, User Manual

Search results

Summary of Contents for MD2000

Reviews:

Related manuals for MD2000

Brands by name

Popular brands