PANAVISION Genesis, User Manual

Page: 72 / 278

Panavision Genesis Manual v1.3
–
72
V39
AUDIO INPUT CH1 Female XLR
Connects to incoming analog audio for channel 1.
Channel 1 is often used as a “scratch track” and fed from the Sound
Department via cable or wireless unit.
AUDIO INPUT CH2 Female XLR
Connects to incoming analog audio.
Channel 2 is often used for secondary LTC time code signal fed from
the Sound Department via cable or wireless unit.
LINE MIC MIC+48VON 3-position Slider Switches
Each of the two switches selects the type of audio signal connected
to the XLR below it (CH1 or CH2).
LINE – is for line level signals, typically from Sound
Department
MIC – is for microphone level signals, or in rare cases, an
ordinary microphone
MIC+48VON – is for “phantom-powered” microphones that
require a 48 volt power supply.
Consult the Sound department to check whether the audio and or
LTC (time code) signals are microphone or line level. An incorrect
setting will give you a distorted audio or LTC signal.