PANAVISION Genesis, User Manual

Page: 181 / 278

Panavision Genesis Manual v1.3
–
181
V39
9. Push thumbwheel, only one
digit is now highlighted
10. Turn thumbwheel to
increment hour
11. Push thumbwheel to confirm, all the digits are highlighted
12. Turn thumbwheel until SET is highlighted
13. Push thumbwheel to confirm new TC value. The bottom window
disappears, and the upper right window is highlighted
14. Push rectangular HOME button on left to exit to main screen
15. Insert new tape, you’re ready to record. The first recording will
start with the PRESET Time Code value you have set.
X
If you get a STANDBY error when you try to SET, it will be
necessary to turn STANDBY OFF by keeping FUNC pushed down
while you push STOP. See
7.6
(This error can only happen if you have a tape in)