PANAVISION Genesis, User Manual

Page: 215 / 278

Panavision Genesis Manual v1.3
–
215
V39
21.6 To connect Genesis Dual-Link video to the SRPC
Dual Link
HD SDI
connection
1. Mount a GDPL BNC box on to the top or rear Genesis port.
2. Connect a BNC cable between CAMERA A on Genesis and HD
SDI IN A on SRPC (maximum length of 75 feet)
3. Connect a BNC cable between CAMERA B on Genesis and HD
SDI IN B on SRPC (maximum length of 75 feet)
4. Push VIDEO menu button on left of the SRWC panel of the
SRW-1, and check that VIDEO I/O is set to VA INPUT SDI.
Otherwise you will not get a signal (See
27.3 )
X
21.7 Audio connections and settings
When the VTR is separated from camera, connect the CH1 and CH2
Audio to the SRW-1, exactly the same as when the VTR is mounted
on the Genesis.
However, the audio settings will default to the SRPC
settings. You should therefore repeat the settings described in
chapter 19 with the SRW-1 connected to the SRPC .