PANAVISION Genesis, User Manual

Page: 46 / 278

Panavision Genesis Manual v1.3
–
46
V39
MAIN POWER Switch & Green
24V 12V lights
Switch up to turn camera ON.
The camera takes 10-15 seconds
to initialize.
Two green LEDs above indicate
presence of 12V and 24V power
sources.
REF OUT BNC
Two uses:
1. Reference signal output to
connect to GEN LOCK input of
other Genesis cameras.
2. Monochrome output with
menus see chapter 10
GEN LOCK BNC
input to synchronize camera to
external reference from another
Genesis or other video source
using a tri-level signal.
Do not turn off the camera while it is executing a Black Balance
(ABB) as indicated on the LCD panel and in the Viewfinder -- doing
so might change menu settings in unpredictable ways.