14
Cleaning of the front glass
Use lens cleaning paper (used to clean camera
or spectacles lenses) to remove any dirt on the
front glass. (If dust or the like is adhered at this
time, the front glass may get scratched.We
recommend rinsing for stubborn stains.)
Consumable parts
The following are consumables: Replace them
in accordance with their operating lifetimes.
Their operating lifetimes vary depending on the
usage environment and conditions. The oper-
ating lifetimes below are just guides for when
using the camera at +35 °C {95 °F}.
• Lens unit, panning motor, tilting motor, thin
coaxial cable for tilting, panning main gear,
tilting main gear, gear unit:
Approximately 1 million actions
• Cooling fan: Approx 52,000 hours
• Slip ring: Approximately 1 million actions
• Wiper rubber: Approximately 0.12 million
actions. Approximately 2 years.
* If the [Run] button of [Reset at replacement] is
pressed at the time of replacing wiper rubber,
the date of replacing the wiper rubber is
recorded, and the count of operating wiper
rubber and the standard count of replacements
are displayed.
Refer to the operating instructions on the
provided CD-ROM for how to perform the
settings.
• Wiper motor: Approximately 0.8 million
actions
Lens and pan/tilt head
If a lens and pan/tilt head are not performed for
a long period of time, the grease coating inside
these parts may become sticky. That may
obstruct the parts from moving.
To prevent this, move the lens or pan/tilt head
periodically. Or perform position refresh periodi-
cally in the manner described in “Position
refresh”.
Position refresh
During the use for a long period of time, the
preset positions may become inaccurate.
When “Position refresh” is set for the created
schedule, the camera position will be corrected
periodically. Refer to the Operating Instructions
on the provided CD-ROM for how to perform
the settings.
AVC Patent Portfolio License
THIS PRODUCT IS LICENSED UNDER THE
AVC PATENT PORTFOLIO LICENSE FOR THE
PERSONAL USE OF A CONSUMER OR
OTHER USES IN WHICH IT DOES NOT
RECEIVE REMUNERATION TO (i) ENCODE
VIDEO IN COMPLIANCE WITH THE AVC
STANDARD (“AVC VIDEO”) AND/OR (ii)
DECODE AVC VIDEO THAT WAS ENCODED
BY A CONSUMER ENGAGED IN A
PERSONAL ACTIVITY AND/OR WAS
OBTAINED FROM A VIDEO PROVIDER
LICENSED TO PROVIDE AVC VIDEO. NO
LICENSE IS GRANTED OR SHALL BE
IMPLIED FOR ANY OTHER USE. ADDITIONAL
INFORMATION MAY BE OBTAINED FROM
MPEG LA, L.L.C.
SEE HTTP://WWW.MPEGLA.COM
Code label
The code labels (accessory) are required at
inquiry for trouble. Use caution not to lose
these labels. It is recommended to paste one
of the labels onto the CD-ROM case.
Equipment classification and power
source indication label
Please remove the side cover of this product
and read the indication label on the connector
part for the classification, power source, and
other information of this product.
Product disposal/transfer
Data saved on this product or a storage device
used with this product may lead to personal
information leakage. When it is necessary to
dispose or give this product to someone, even
when for repair, make sure that there is no data
on this product.
When abandoning the memory media, it is
recommended to destroy it physically after
deleting data by PC.
