11
or excessive heat resulting in a fire. Do not use
damaged power plugs or power outlets.
Securely connect the power cable.
Loose connection may cause electric shock or
heat resulting in fire.
Regularly remove any dust, etc. from the
power plug.
Accumulated dust may cause an insulation
defect from moisture, etc., resulting in a fire.
Disconnect the power plug, then wiping with a
dry cloth.
Always hold the plug when unplugging the
power cord.
Otherwise, the cord may be damaged and
result in a fire or electric shock.
The screws and bolts must be tightened to
the specified torque.
Failure to observe this may cause a drop
resulting in injury or accidents.
Install this product in a place with enough
pull-out strength of the anchor.
Failure to observe this may cause fall down or
topple over resulting in injury or accidents.
Install this product in a location high
enough to avoid people and objects from
bumping the product.
Failure to observe this may cause injury.
Securely fixate this product when install-
ing it in a place where there is vibration.
Failure to observe this may cause a drop resulting in
injury or accidents.
Periodic inspections shall be conducted.
Rust on the metal parts or screws may cause a
fall of the product resulting in injury or accidents.
Consult the dealer for the inspections.
The exclusively designed mount bracket
shall be used.
Failure to observe this may cause a drop
resulting in injury or accidents. Use the exclu-
sively designed mount bracket for installation.
Always inspect after an earthquake
The mounting portions on the main body may
be damaged and a fall may occur.
Be sure to consult the dealer.
Turn the power off when cleaning this
product.
Failure to observe this may cause electric shock.
The measures of protection against a fall
of this product shall be taken.
Failure to observe this may cause a drop
resulting in injury.
Be sure to install the safety wire.
The measures of protection against snow-
fall shall be taken.
Weight of snow may cause a fall of the product
resulting in injury or accidents. Protect the prod-
uct against snowfall by installing it under eaves.
Do not forcibly pull on the cable.
Failure to observe this may cause fire or electric
shock.
Do not damage cables or the like.
The cable may be damaged if you put heavy
objects on it or pinch it, resulting in fire or
electric shock.
Do not insert any foreign objects.
Fire or electrical shock may be caused if water
or any foreign objects, such as metal objects,
enter inside the unit.
Turn the power off immediately and contact
qualified service personnel for service.
Do not exceed the stated voltage capacity
of the power outlet and wiring accessories.
When you plug too many leads into a single
socket over the rated power, overheating may
cause fire.
Do not strike or give a strong shock to this
product.
Failure to observe this may cause fire or injury.
Do not place this product in an unstable place.
Failure to observe this may cause fall down or
topple over resulting in injury or accidents.
