12
Do not hang down from this product or
use this product as a pedestal.
Failure to observe this may cause injury or
accidents.
Do not use this product in an inflammable
atmosphere.
Failure to observe this may cause an explosion
resulting in injury.
Avoid installing this product in the loca-
tions where corrosive gas is produced.
Otherwise, the mounting portions may deterio-
rate and thus the product may fall down,
resulting in injury or accidents.
Do not install this product in a place that
is easily exposed to oil.
Otherwise, the mounting portions may deterio-
rate and thus the product may fall down,
resulting in injury or accidents.
Do not damage the power cable and the
power plug.
Do not damage, fabricate, twist, stretch, bun-
dle, or forcibly bend the power cable. Do not
place heavy objects on it, and keep it away
from heat sources.
Use of a damaged power cable may cause
electric shock, short circuit, or fire.
Consult the dealer for repair.
Do not touch the main body during the
rotating operation.
Otherwise, your finger may get caught in the
rotating unit, thus resulting in injury.
Do not install beneath areas where layers
of snow could fall.
Failure to observe this may cause a drop resulting in
injury or accidents.
Do not install this product on a place that
is greatly influenced by wind.
Installation in a place where the wind speed is
80 m/s {156 knot} (wind speed in the fore posi
-
tion is 60 m/s {117 knot} or more) or more may
cause a fall of the product resulting in injury or
accidents.
Never touch the power plug with wet hands.
This may result in electric shock.
Do not attempt to disassemble or modify
this product.
Failure to observe this may cause fire, electric
shock, or a drop resulting in injury or accidents.
Consult the dealer for the repair or inspections.
Do not install or clean the camera, or
touch this product, the power cable or the
connected cables during thunder storms.
Failure to observe this may cause electric
shock.
Be careful when installing this product.
Dropping this product on your foot may cause
injury.
Do not use this product as a footstool or
bench.
Failure to observe this may cause injury.
Do not rub the edges of metal parts with
your hand.
Failure to observe this may cause injury.
Do not install this product in a place where
the temperature can get abnormally high.
Parts may deteriorate, resulting in fire.
Do not apply excessive force.
Otherwise, mounting portions may get dam-
aged and fall, resulting in injury or accidents.
[Precautions for use]
To keep on using with stable performance
Do not use this product in hot and humid con-
ditions for a long time. Failure to observe this
causes component degradation resulting in life
shortening of this product. Please ensure good
heat dissipation of the installation location and
avoid direct heat from a heater or the like.
This product has no power switch.
This product has no power switch.
To cut the power supply off from this product,
unplug the power cord or turn the tested PoE
injector OFF. Make sure that the power cord of
the camera or the tested PoE injector can be
