•
Default:
None (blank)
[OSD] - [Position]
Select the position where the time and date and a character string to be displayed on the image of the “Live”
page.
•
Upper left:
The information will be displayed at the upper left corner of the main area on the “Live” page.
•
Lower left:
The information will be displayed at the lower left corner of the main area on the “Live” page.
•
Upper right:
The information will be displayed at the upper right corner of the main area on the “Live” page.
•
Lower right:
The information will be displayed at the lower right corner of the main area on the “Live” page.
•
Default:
Upper left
[Brightness status display]
Select “On” or “Off” to determine whether or not to display the status of brightness on images displayed on the
“Live” page when adjusting brightness.
•
Default:
On
[Upside-down]
Select “On” or “Off” to determine whether or not to turn the image upside-down.
•
Default:
Off
[Mirror]
Select “On” or “Off” to determine whether or not to turn the image over horizontally.
Default:
Off
[Indicator]
Determine whether or not to use the following indicators. Select “On” to use the following indicators to check
the operational status. Select “Off” to turn off the indicators at all times.
–
Link indicator
–
Access indicator
–
SD memory card error indicator
•
Default:
On
Note
•
Link indicator (orange):
This indicator will light when communication with the connected device is
available.
•
Access indicator (green):
This indicator will light when accessing a network.
•
SD memory card error indicator:
Lights when an error occurred in the SD memory card.
[Alarm status update mode]
Select an interval of the camera status notification from the following.
When the status of the camera changes, the alarm occurrence indication button or the SD saving status
indicator will be displayed to notify of the camera status.
•
Polling(30s):
Updates the status each 30 seconds and provide notification of the camera status.
•
Real time:
Provide notification of the camera status when the status has changed.
•
Default:
Real time
Note
•
Depending on the network environment, notification may not be provided in real time.
•
When multiple cameras are using the same “Alarm status reception port”, even if “Real time” is selected
for “Alarm status update mode”, status notification is not provided in real time. In this case, change the
“Alarm status reception port” settings.
48
Operating Instructions
10 Configure the basic settings of the camera [Basic]
