When “1.3 mega pixel [16:9]” is selected for “Image capture mode”
1280x720
*1
/640x360/320x180
When “1.3 mega pixel [4:3]” is selected for “Image capture mode”
1280x960
*1
/VGA/QVGA
[Recording priority]
From the following, select a recording priority for H.264 images to be recorded.
•
Constant bit rate:
H.264 images will be recorded with the bit rate selected for “Max bit rate”.
•
Frame rate:
H.264 images will be recorded with the frame rate selected for “Frame rate*”.
•
Advanced VBR:
H.264 images will be recorded with the frame rate selected for “Frame rate*”. Images are
recorded so that the average transmission rate during the period specified for “Control time period”
becomes the bit rate selected for “Max bit rate”.
•
Default:
Frame rate
[Frame rate*]
Select the frame rate for images to be recorded from the following.
1fps/ 3fps/ 5fps*/ 7.5fps*/ 10fps*/ 12fps*/ 15fps*/ 20fps*/ 30fps*
•
Default:
30fps*
Note
•
When “Frame rate” or “Advanced VBR” is selected for “Recording priority”, this setting is available.
•
“Frame rate*” is restricted by “Max bit rate”. For this reason, the frame rate may be lower than the
specified value when any value marked with an asterisk (*) is selected.
[Control time period]
Select the time period that the bit rate of images to be recorded will be controlled for from the following. Images
are recorded so that the average bit rate during the selected period becomes the bit rate selected for “Max bit
rate”.
1h/6h/24h/1week
Default:
24h
Note
•
This setting is only available when “Advanced VBR” is selected for “Recording priority”.
[Max bit rate]
Select the bit rate for images to be recorded from the following.
64kbps/ 128kbps/ 256kbps/ 384kbps/ 512kbps/ 768kbps/ 1024kbps/ 1536kbps/ 2048kbps
•
Default:
–
H.264(1): 2048kbps
–
H.264(2): 1536kbps
[Image quality]
Select the quality for H.264 images to be recorded from the following.
Low(Motion priority)/ Normal/ Fine(Image quality priority)
•
Default:
Normal
Note
•
When “Constant bit rate” is selected for “Recording priority”, this setting is available.
[Refresh interval]
Select an interval (I-frame interval; 0.2 - 1 second) to refresh the H.264 images to be recorded from the
following.
0.2s/ 0.25s/ 0.33s/ 0.5s/ 1s
Operating Instructions
65
10 Configure the basic settings of the camera [Basic]
