45
■
Panasonic alarm protocol setup
■
IP address setup
No.
Item
Description
(1)
[Panasonic alarm
protocol]
Default: OFF
Set whether or not to send notification for alarm detections and for
information about the SD memory card.
................................................................................................................
Note
• When "ON" is selected, notification of the alarm occurrence will be
performed to registered destination addresses in order starting with
[IP address 1]. (only to destination addresses whose "Alarm" or
"Diag." check box is selected)
.....................................................................................................................
ON
Notification by Panasonic alarm protocol is performed.
OFF
Notification by Panasonic alarm protocol is not performed.
(2)
[Destination port]
Default: 1818
Select a destination port for notification by the Panasonic alarm protocol.
Available port number: 1 to 65535
(3)
[Retry times]
Default: 2
Select the number of retries when notification by Panasonic alarm
protocol is not possible.
Available retry times: 1 to 30
No.
Item
Description
(4)
IP address setup 1 to 8
Enter the IP address of the destination(s) to perform notification by
Panasonic alarm protocol. Up to 8 destinations can be registered.
Important
• Confirm that the IP addresses are registered correctly. When a
registered IP address does not exist, notification by Panasonic alarm
protocol may be delayed.
• IP addresses cannot be entered as a host name. Be sure to specify
destinations as an IP address.
Alarm
To perform notification by Panasonic alarm protocol when an alarm is
detected, select the "Alarm" check box.
Diag.
Select the "Diag." check box to send notifications about the remaining
space on the SD memory card, the SD memory card is full, or when
mounting the SD memory card has failed by e-mail.
Destination IP
address
Enter the IP address of the destination mail address.
[DEL] button
To delete a registered IP address, click the [DEL] button.
