35
(3)
[Scene change detection
alarm]
Default: OFF
Select the detection sensitivity level of the scene change detection alarm.
The scene change alarm detects changes in the subject's state, such as
when the camera is covered with a cloth or cover, or when the camera's
orientation has changed.
................................................................................................................
Note
• Motion cannot be detected by the [Scene change detection alarm]
function in the following situations:
• Only a part of the screen is covered
• The covering is translucent
• The subjects before and after the camera's orientation has
changed resemble each other.
• False detection by the [Scene change detection alarm] function might
occur in the following situations:
• When extreme changes in lighting occur, such as turning the lights
on and off
• When pedestrian or vehicle traffic is heavy
.....................................................................................................................
ON(High)
High-sensitivity scene change alarm operation is performed.
ON(Middle)
Medium-sensitivity scene change alarm operation is performed.
ON(Low)
Low-sensitivity scene change alarm operation is performed.
OFF
Scene change alarm operation is not performed.
(4)
[Command alarm]
Default: OFF
Select whether or not to receive input from the command alarm.
The "Command alarm" function performs notification of a Panasonic
protocol alarm from other cameras.
ON
Command alarm input is received.
OFF
Command alarm input is not received.
(5)
[Originating port number]
Default: 8181
Enter the port number to be used to receive the command alarm.
Available port number: 1 to 65535
(2/2)
No.
Item
Description
