50
Configure the Servers Settings [Server setup]
The mail server and FTP server settings can be configured on the "Server setup" page.
The "Server setup" page has 2 tabs: the [Mail] tab and the [FTP] tab.
Setting the mail server [Mail]
Click the [Mail] tab on the "Server setup" page.
On this page, the settings for the mail server used that sends the alarm mail can be configured.
No.
Item
Description
(1)
[SMTP server address]
Enter the IP address or host name of the SMTP server used to send e-
mails. To enter the host name for "SMTP server address", it is necessary
to configure the DNS settings on the [Network] tab of the "Network setup"
page. (
→
page 52)
Number of characters for the server address: 1 to 128
(2)
[POP server address]
When "POP before SMTP" is selected for "Authentication", enter the IP
address or host name of the POP server. To enter the host name for
"POP server address", it is necessary to configure the DNS settings on
the [Network] tab of the "Network setup" page. (
→
page 52)
Number of characters for the server address: 1 to 128
(3)
[Authentication]
Default: None
Select the authentication method to send e-mails from the following:
................................................................................................................
Note
• When you do not know the authentication method for sending e-
mails, consult with the network administrator.
.....................................................................................................................
None
It is not necessary to clear any authentication to send e-mails.
POP before SMTP
It is necessary to first clear POP authentication to use the SMTP server to
send e-mails.
SMTP
It is necessary to clear authentication to send e-mails.
(4)
[User name]
Enter the user name to access the server.
Number of characters for the user name: 1 to 32
(5)
[Password]
Enter the password to access the server.
Number of characters for the password: 0 to 32
(6)
[Sender mail address]
Enter the mail address of a sender.
The entered mail address is displayed in the "From" field of the sent mails.
Number of characters for the sender mail address: 3 to 128
(1)
(2)
(3)
(6)
(4)
(5)
