53
(1/2)
No.
Item
Description
(1)
[DHCP]
Default: OFF
Select whether or not to use the DHCP function.
Configure the DHCP server not to assign the same IP address for the
PCs (ones not using DHCP function) and other network cameras.
ON
The DHCP function is used.
OFF
The DHCP function is not used.
(2)
[IP address]
Default: 192.168.0.10
When the DHCP function is not used, enter the IP address of the camera.
Do not enter an IP address already in use (for the PCs and the other
network cameras).
(3)
[Net mask]
Default: 255.255.255.0
When the DHCP function is not used, enter the subnet mask of the
camera.
(4)
[Default gateway]
Default: 192.168.0.1
When the DHCP function is not used, enter the default gateway address
of the camera.
(5)
[HTTP port]
Default: 80
Assign HTTP port numbers independently.
Available port number: 1 to 65535
................................................................................................................
Note
• Use any port numbers other than the following as the HTTP port
number: 20, 21, 23, 25, 42, 53, 67, 68, 69, 110, 123, 161, 162, 995,
10669, 10670.
.....................................................................................................................
(6)
[DNS]
Default: MANUAL
Select whether to obtain DNS server address manually or automatically.
AUTO
When using the DHCP function, it is possible to obtain the DNS server
address automatically by selecting "AUTO".
MANUAL
Enter DNS server address when DHCP function is no in use. It is
necessary to enter "Primary DNS" and "Secondary DNS". (These
settings can also be entered when using the DHCP function.)
(7)
[Primary DNS]
[Secondary DNS]
When "MANUAL" is selected for [DNS], enter the IP address of the DNS
server.
(8)
[Line speed]
Default: AUTO
Select the line speed for transmission.
................................................................................................................
Note
• Normally, we recommend using the default, "AUTO".
.....................................................................................................................
AUTO
The line speed will be automatically selected.
100M-FULL
100 Mbps full-duplex is selected as the line speed for transmission.
100M-HALF
100 Mbps half-duplex is selected as the line speed for transmission.
10M-FULL
10 Mbps full-duplex is selected as the line speed for transmission.
10M-HALF
10 Mbps half-duplex is selected as the line speed for transmission.
