42
[Simple Black & white mode]
Select "AUTO" or "OFF" for the simple black and white
mode.
OFF:
The camera will always be in the colour mode.
AUTO:
The camera will automatically be in the colour
mode or in the black and white mode depending on
brightness (intensity of illumination).
When taking images under dark illumination, the
camera will automatically become in the black and
white mode.
When taking images under bright illumination, the
camera will automatically become in the colour
mode.
Default:
OFF
• Approximate indication of brightness (intensity of
illumination) that makes the camera to switch
from the colour mode to the black and white
mode: Approx. 3 lx (When "ON" is selected for
"AGC")
• Time to be taken to switch from the colour mode
to the black and white mode: Approx.5 seconds
[White balance]
Select a method of white balance adjustment from the
following.
White colour can be adjusted by "Red Gain" and "Blue
Gain".
ATW1:
Auto tracing white balance mode
The camera will constantly check the colour temper-
ature of the light source and adjust the white bal-
ance automatically.
Operating colour temperature range is approx.
2 700 K – 6 000 K.
ATW2:
Auto tracing white balance under a sodium
lamp. The camera will adjust the white balance auto-
matically under a sodium lamp.
Operating colour temperature range is approx.
2 000 K – 6 000 K.
AWC:
Auto white balance control mode
Suitable for shooting where the light source is fixed
and the light intensity is constant. Operating colour
temperature range is approx. 2 000 K – 10 000 K.
Default:
ATW1
Notes:
• Under the following conditions, colour may not be
faithfully processed. In these cases, select "AWC".
• When shooting a subject whose major part is a
thick colour
• When shooting blue sky or sun at sunset
[Mask area]
When "OFF" is selected for "Super Dynamic 3", it is
possible to compensate for backlight by masking the
brighter area.
Refer to page 44 for descriptions of how to mask.
[Shutter]
Select the shutter speed from the following.
AUTO:
Provides clearer images of bright objects out-
doors since the shutter speed is adjusted automati-
cally. Flickering caused by fluorescent lamps can
also be compensated.
OFF:
Fixed at 1/60 sec
1/100:
Recommended when flickering caused by fluo-
rescent lamp appears frequently.
Default:
AUTO
Depending on the environment, flickering may not be
compensated even when selecting "AUTO". When flick-
ers appear frequently, set the shutter speed to "1/100".
[AGC]
Select a method of gain adjustment from the following.
ON (HIGH)/ON (MID)/ON (LOW):
When the luminance
of the subject becomes darker, gain will be automati-
cally incremented and screen will become brighter.
"HIGH", "MID" and "LOW" are indications of gain
level.
OFF:
Images will be captured with the fixed gain level.
Default:
ON (HIGH)
[Sensitivity up]
The electronic sensitivity enhancement (sensitivity up)
can be carried out by adjusting the storage time of CCD.
The following are available for the sensitivity up.
OFF/x2 AUTO/x4 AUTO/x6 AUTO/x10 AUTO/
x16 AUTO/x32 AUTO
Default:
OFF
Note:
When "x32 AUTO" is selected, for example, sensitiv-
ity will automatically be increased up to x32.
Important:
When the sensitivity up function is active, frame rate
may become lower. Noise or white dots (blemishes)
may sometimes appear.
